AquaJohn

it depends on the drivers you have most react to slowly to act like lightning strikes and all they do is scare your fish anyways err well and look cool and make you smile. I have seen a set of instructions to do it on RC's neptune systems forum in there sponsors section.

SOLD

I would say unless I get most of the pcs sold seperatly I am not gona start parting it out for a few weeks. Priority will go to people wanting multiple pcs. but if you want somthing feel free to drop me a PM with an offer. And i will start a list

I changed to a Apex so no longer need this RKL I had on my tank. It comes with Head Unit 2- 4outlet plugs rkl Itemp probe Sid (used to update firmware on all components) SL1 with PH probe and 2 float switch conectors ALC With 1 light connector (used to control advanced lighting systems)and 2 moon lights included HUB (allows you to connect 5 things to one box and not just daisy chain them. Y-splitter thing used to connect the SID and moduals to the headunit. All the phone cords to connect all units and one extra. One is there long cable. Everything works but it is used. I purchased it about a 6 months ago used off of ebay with A LED kit. I have 7 meanwell drivers and to use the ALC with it would take building a special addapter to get it to run all of them and I did not trust my electrical skills to build it without frying the rkl and my lights so I gave up and just used the rapid led controler for the lights. They say the ALC will push 4 meanwells with its 2 outputs. $300 obo. Will only hold with Paypal. I can ship it for an additional 10 bucks to cover postage. Willing to meet at RCA or somewhere in that area on a Friday or Sat around noon or we can work something else out. I live in Burnet Tx so its like 1 1/2 hour drive to Austin.

you have some cool looking stuff wish it was around when I started my tank.

Sold!!

Pending

Chrome

I have a pm redline 175 that I was using on my 110g listed in the forsale section at $150. I upgraded to a bigger skimmer because my tank is getting bigger soon .

Pm back at ya

well the forsale forum here is an awsome resorce to get started on a budget.

Umm I think you are in the wrong place if you think no one will judge you laugh with you and at you but not for buying a pair of fish you really want. enjoy

I would say if you post your tank size and if its a fowler or reef would help. Me personaly depending on Size I would guess 48" I would look into a used led like the SOL it might not be big enough for 48" though.

could the tank only be free for me nice setup

bump

bumpity bump bump

you might want to consider renting the tile saw from a box store they are way better to use than the el cheepo ones and you dont have to store a tool you will probly never use again lol. I know I would do that and I own one of the el cheepo home depot saws.

Hey you broke mine by fixing yours lol

Cool

if you want to rush it put some ice in a ziplock and rub the foot with it thru the plastic that is stuck to they usualy will release there hold in a few min from the cold. But I am sure he will move on his own in a few hours.

Ya I brush my teeth regularly

The water level of the tank is within 1/4 in in the 60 in length of the tank . So the tank is fairly level The high over flow is on the right.I raised the left side of the pipe that crosses the sump an inch and slowed the return a bit and its back to level I'm going to raise the flow back up in the am when I can keep an eye on it I had the sledge out but decided to try it next if the flow don't work

I have an over flow box on each end of the tank with a 1" durso pipe leading to a 3/4 bulkhead drain in the bottom. The 3/4 drains lead to a 1"1/4 pvc pipe that spans accross my sump to join both 3/4 drains . Each end of the 1 1/4 pipe has a 1 1/4 down spout one side dumps into my skimmer the other side SLOWLY drains to my sump. recently one over flow has been filling to the waterline of the tank and the other is still 2-3" from the water line any Ideas why ? and how to fix the problem. I just tried moving 1 end of the 1 1/4 pipe about an inch to see if mabey air is trapped in there after a few hours I am going to lower it back down and lift the other side to see if it changes anything.

LOL are you ever gona finish getting rid of your stuff

also the android app for the apex is very cool to if you get it. They have an Iphone one also but I cant comment on how that works. Now to get the apex working my DIY leds and I can rip out my rkl and change over to the apex for full control The way the RKL works led totaly sucks as far as I am concerned. and I probly should have just got a new light controller but I am a eq junky and thought the apex looked cool lol.