(Bio)³ Posted October 25, 2012 Share Posted October 25, 2012 Wonder if they will ever come out with a clear cartridge for the printer? Quote Link to comment Share on other sites More sharing options...
chippwalters Posted October 29, 2012 Author Share Posted October 29, 2012 Timfish kindly donated some acrylic tubes for a custom reactor. A couple versions are already designed, but my printer head is currently jammed. Anyway, here are a few renders.... Sent from my iPad using Tapatalk HD 1 Quote Link to comment Share on other sites More sharing options...
+Mitch Posted October 29, 2012 Share Posted October 29, 2012 very cool! Quote Link to comment Share on other sites More sharing options...
+Capt. Obvious Posted October 29, 2012 Share Posted October 29, 2012 have you tried autodesk 123D? Quote Link to comment Share on other sites More sharing options...
bige Posted October 29, 2012 Share Posted October 29, 2012 That's really cool. Quote Link to comment Share on other sites More sharing options...
Peter Gott Posted October 30, 2012 Share Posted October 30, 2012 Way to stay ahead of the curve! I love seeing technology adapted to the reefing hobby like this! Your idea has so many awesome applications, too. Quote Link to comment Share on other sites More sharing options...
+Mitch Posted June 20, 2013 Share Posted June 20, 2013 Timfish kindly donated some acrylic tubes for a custom reactor. A couple versions are already designed, but my printer head is currently jammed. Anyway, here are a few renders.... Chip, did you end up implementing this? If so, did you implement using ABS? If so, how has it handled the SW environment? Quote Link to comment Share on other sites More sharing options...
+Capt. Obvious Posted June 20, 2013 Share Posted June 20, 2013 Abs or PLA Quote Link to comment Share on other sites More sharing options...
+Mitch Posted June 20, 2013 Share Posted June 20, 2013 Abs or PLA From my readings, I wouldn't think that PLA would be a good plastic to use in a wet environment. Please enlighten if you can. Quote Link to comment Share on other sites More sharing options...
+Capt. Obvious Posted June 20, 2013 Share Posted June 20, 2013 Different types of pla have different solubility levels, for prototyping something it is ok extended use...not so much. There are pla based water bottles out there Quote Link to comment Share on other sites More sharing options...
Texasrob Posted June 23, 2013 Share Posted June 23, 2013 Do u sell those hose clips? Quote Link to comment Share on other sites More sharing options...
chippwalters Posted June 30, 2013 Author Share Posted June 30, 2013 have you tried autodesk 123D? Yes, a little bit. I'm now using FormZ which is a real solid modeler. They also have a product called Bonzai 3D which is a bit less expensive and works great too. That's really cool. Thanks! Way to stay ahead of the curve! I love seeing technology adapted to the reefing hobby like this! Your idea has so many awesome applications, too. Been on hold for awhile due to jobs-- but I want to create a shade for my new build my LED actinic fixture. Timfish kindly donated some acrylic tubes for a custom reactor. A couple versions are already designed, but my printer head is currently jammed. Anyway, here are a few renders.... Chip, did you end up implementing this? If so, did you implement using ABS? If so, how has it handled the SW environment? I did work on it for awhile, but it's a tedious process even for a solid modeler. Especially since the resolution for basic 3D printers isn't that great. So for instance if you create a 1/2" bolt for a 1/2" nut, it won't work. You need the hole and threads in the nut to be a bit larger-- and it's different for every project. Then of course SketchUp is a surface modeler, and it just adds to the complexity. I did create a logo plate for Timfish last weekend. Abs or PLA ABS. Not sure PLA would be good in saltwater. My guess is not. Abs or PLA From my readings, I wouldn't think that PLA would be a good plastic to use in a wet environment. Please enlighten if you can. I thinks you're correct. Different types of pla have different solubility levels, for prototyping something it is ok extended use...not so much. There are pla based water bottles out there Did not know that. Do you have a link? Do u sell those hose clips? No, but I can make one if you like. Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 6, 2013 Author Share Posted July 6, 2013 Created a larger clip per Timfish's request. Here are the 3D renderings. I'll take a shot of it tomorrow when it's printed. Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 6, 2013 Author Share Posted July 6, 2013 Here are some of the prints from the above designs: Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 6, 2013 Author Share Posted July 6, 2013 And here's the little brother to the one above. (It's actually the one being printed right now on the Cube in the pic above). Quote Link to comment Share on other sites More sharing options...
julespinkyd Posted July 14, 2013 Share Posted July 14, 2013 That is one awesome device. The possibilities are endless... Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 14, 2013 Author Share Posted July 14, 2013 What software do you use for the 3d modeling? For anyone who's still hanging around, I've since switched to FormZ. It has a great automatated screw thread generator and is also a solid modeler (not a surface modeler like SketchUp) which makes things considerably easier. Quote Link to comment Share on other sites More sharing options...
(Bio)³ Posted July 14, 2013 Share Posted July 14, 2013 What software do you use for the 3d modeling? For anyone who's still hanging around, I've since switched to FormZ. It has a great automatated screw thread generator and is also a solid modeler (not a surface modeler like SketchUp) which makes things considerably easier. How much does the software cost? and renewal fees? Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 14, 2013 Author Share Posted July 14, 2013 (edited) You can get the latest release of Bonzai 3D, which does just about everything you need except screw threads for $395, but the full FormZ package runs $995. Haven't yet heard of any 'renewal fees' though upgrading from the previous version is $295. Runs on both Mac and PCs. So, if you get the latest Cube printer ($1299) and FormZ it will set you back around $2,300. BTW, Some of the Staples are starting to sell the Cube printer: http://www.staples.com/Cube-3D-Printers/product_SS2044291 Edited July 14, 2013 by chippwalters Quote Link to comment Share on other sites More sharing options...
(Bio)³ Posted July 14, 2013 Share Posted July 14, 2013 Any trial offers available on the formz? I'm interested in it for when my stuff finally arrives but would hate to drop a grand and find out I dont like the program. Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 14, 2013 Author Share Posted July 14, 2013 http://www.formz.com/products/formz/formzTrial.html Quote Link to comment Share on other sites More sharing options...
(Bio)³ Posted July 14, 2013 Share Posted July 14, 2013 http://www.formz.com/products/formz/formzTrial.html Suppose I should have looked before asking. Thanks chipp! Quote Link to comment Share on other sites More sharing options...
offroadodge Posted July 16, 2013 Share Posted July 16, 2013 what do u think about this printer? was looking at maybe purchasing it. $1200 Quote Link to comment Share on other sites More sharing options...
chippwalters Posted July 16, 2013 Author Share Posted July 16, 2013 http://3d-printers.toptenreviews.com/evolution-review.html FWIW, Everyone wants something different from their 3-D printer. If you are a hobbyist and like to tinker with machines then perhaps one of the DIY models are better like Makerbot. Makerbot also has a very active user community--Something which Cubify does not. But if you're looking for a 3-D printer which is a sheer commodity device with few hassles in setting up and printing, it's hard to beat the Cubify solutions. From my experience, they execute and rarely need any sort of maintenance or adjustments. Your mileage may vary. Quote Link to comment Share on other sites More sharing options...
mFrame Posted July 25, 2013 Share Posted July 25, 2013 Chipp, curious if you've seen this, "http://www.dvice.com/2013-7-24/panic-your-3d-printer-could-be-poisoning-you-while-you-sleep" and what your response to it is. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.