AquaJohn

thanks I have been certified not only for diving for a long time now. I just got out of it when I moved out here and away from my dive partner In so cal it was not very far off to toss the stuff in the truck and do a shore dive. Out here its a bit of a drive to find water LOL.

I have some old tanks that need hydro inspection any good places to go ? Any recommended places to get them filled. I would prefer closer to georgetown or liberty hill but anywhere will work ? I have never had to do it before is it a take it and wait thing ? or does it take some time ?

thanks

Or drop a few pcs in your sump and let them do there thing in there. i would only add a small amount at a time then transfer the stuff from the sump to the tank and add more new to the sump. If you add to much at a time it could cause a cycle.

Best bet is a separate system to let it cycle in with old tank water.

thanks for the info

now I remember why I had my computer in the living room LOL. I need to find a 60+ft network cable to update the firmware.

Ya I know its been out a while but my system was running fine and I did not want to mess with it.

Anyways I got a new phone a verizon note 2 and want to add the app to it. I was running aquanotes. but seems its not available on playstore anymore

I have it on my old phone and have figured out that I can transfer it via blue tooth I have not done it yet but will If I have to.

So the questions

Any major problems going to 4.2 ?

is the neptune app better than aquanotes ? after hours I did manage to figure out how to add a profile to the neptune app LOL. I can access it from in the house or out of range of my wifi . If I log in via the web page I can controll things. If I use the neptune apex app when I hit the controll button it locks up. I assume its because I have not updated the firmware.

Is there a better app out there for controll now adays I have been totaly out of the loop.

thanks

ya I have to dig it all out of the dusty corner of the garage it was packed into and see whats really in there. It was all good stuff but all 5-10 years old. So I am not sure what its current value is.

So I have been in Tx for 5 years now and have not been fishing in that time I have about 30 mid to top of the line reels of varying size I am looking to sell and have no clue if there are any reasonable used tackle stores out here that buy stuff

Or better yet a store that does fishing and shooting that would take them on trade for a fire arm

anything in the austin round rock area out to liberty hill will work .

depends how large the gbta is but that is a food source for them. He may also still be sleeping in the rocks someplace. I have had fish disappear for days and just know they were clean up crew dinner then all the sudden show up. I have also had several never return and never find a body.

and the 2 best days of a boat owner are

the day they buy it

and

the day they sell it LOL

enjoy the heck out of it.

I hope the printed item will stand up to the heat and force produced from the pump. I duno much about it

looks very cool

my only concern would be programing it. I know they say its easy but I run and program a 3 axis mill basically the same thing the printer does only it starts with a chunk of metal and takes away to produce the object and its far from easy when you start after a few years and tons of scrap parts it get to where you only pull out a few wads of hair when the stupid thing does not do what you tell it lol.

I would hope the programing that runs it is smart and don't let you program in incursions ie the printer head drops down into the finished product at some time because of an artifact in the drawing. I uses several programs including bobcad and solidworks for programing I did not look at what they use but if they have a demo available I would suggest trying it before you pay. The 3d software is complex and they may say its easy but they have been using it for a while and want your money.

http://www.harborfreight.com/Roller-Cabinet-44-13-Drawer-Gloss-Red-Industrial-uality-68784.html?ccdenc=eyJjb2RlIjoiNTYxNTY1OTAiLCJza3UiOiI2ODc4NCIsImlzIjoiMzY5Ljk5IiwicHJvZHVjdF9p%0D%0AZCI6Ijg1MDYifQ%3D%3D%0D%0A

Sorry folks I was away from the internet for a while

The gun was sold to a coworker.

check out harbor freight and tool

Yes some of there stuff is cheap crap But they do have very nice roll aways. You can see what they have online. and sign up for there coupons. They regularly have a very large rollaway for 319.

I just got there 4 drawer roll away for 109 to use as a gun smith bench. And its a beast I would put it up against a craftsman quality any day.

Thanks for that info

Would a scrap of paper written as a receipt save my rear if the person I sold it to went out and shot 3 people then tossed it ? Or is there some form to fill out that removes me as the owner of the weapon ? Seems to easy but I have never sold one of my guns lol and I think the thought of that happening is a big part of it.

I got this ruger lc9 with factory laser max laser a while back and its been in the glove box of my car for several months. I finaly got to the range to shoot it put 20 rounds through it and my hands are just to big for it.

Would like to get 400 for it or possible trade for a kel tec plr-16 and I will toss in some cash.

I would consider other firearms but the kel tec is the one I am looking for.

On the other hand I just picked up a kel tec PRM 30 and its a flipping amazingly fun gun to shoot. I have been looking for one for 2 years now they have been from 850-1600 on gunbroker for the last 2 years and I just could not do that for a plinking gun. I happened to walk into a local shop that had just put one in there display at almost MSRP I think I drooled a bit and did not even haggle LOL.

If you are interested it will need to be shipped to a ffl shop or we can meet at one. I am not sure how to sell a used gun never have or never have purchased one private party.

I would tell you but I cant walk away from On Demand lol

I dont think I will be leaving the house all weekend. Im already on season 2 of Game of Thrones and waiting on season 3 of The Walking Dead to run again this weekend so i can catch up. I have seen season 1 and 2 of WD and can't wait to see season 3.

Dont get me started on Dexter I have only seen the first 2 seasons of that. I wonder if my Brother would understand me taking next week off . Northland Cable sucked soooo bad I dont know how I lasted that long with them. Actualy I do I did not want to commit to 2 years when I was unsure if I was staying in TX. I gave up on finding work back in California so am stuck here for a while hehe.

And to think I only have 3 free months to watch years worth of hbo,showtime ect .

Oh and SyFy In HD is so much better than the grain/snow/static picture I got with cable.

If you did not notice so far I am happy as can be.

Other than the installer making me feel like I should have tipped him for all his extra work he had to do by running the wires in the attic and not outside in the cold damp morning. I thought I was doing him a favor in my nice warm open attic . Oh well.

one question ? when you download a on demand movie does it come via internet connection or is it downloaded via the dish ? I tried watching a move before I had a large buffer and it would stop and have to catch up. I do not have that problem with netflix. but it could be the number of things I was trying to record.

how aggressive are they ? Do they host in an anemone ?

Thanks for all the input

DirectV is on its way

You all better be right or I will have to come to a meeting and kick some rear:) lol

is she a hand fed ? or wild caught

I live in Texas where its leagal to own any of them don't ask about my pistol collection

The ar is not really for home defence its for when the government over steps its bounds and we the people need to be able to retake it over like we did from England .

Altho with all the talk of how an ar is not the right weapon for home defence why is it all the tactical teams use them in close quarters and swat uses them when ever they enter homes in hostage or drug situations. Why do the congress men's guards use them to defend the congressmen yet I can't use one to defend myself. I dont get it.

Ban guns in schools yet Obamas kids have armed guards at there schools lol I dont get it.

its 18 1/2" + a bit for the choke/suppressor. I cant wait to blast some 3 1/2 magnum slugs through it to set the eotech. It was purchsed at budsgunshop.com not at the show. The prices of everythting was crazy. I did pick up a flash light its the one on the 887.

I have a remington 1100 20 ga that I got when I was 15 that is used for dove real men don't need a 12ga for tweety birds lol.

ya the quilt is hand made by my mom and in her room for when she comes out to visit from Californa. not quite my taste but I will always keep it.

$700 LOL heck thats only 500 rounds of ammo for it now adays if you can find it . Im down to like 2000 rounds can't even go out in plink with it anymore for fear of the Zombies comming and not having enough ammo to take out the town here when they change pop is like 5500.

Well The AR-15 has been around a few years just added the Remington 887 12Ga in case they get by my 2 rottweilers lol.

bah the picture sucks but oh well I guess its time for a new phone

did anyone else go to the gunshow last week It was a friggin zoo the line after parking just to get into the building was over 1 and 1/2 hours long from when they opened and was that long when I left on sat around noon.

ask anyone bigger is better in most things no mater what they say.

if its full of water and bubbling lifting greenish grey smelly goo out then its working good.

A skimmer does not know how big your tank is. All it does depending on kind is circulate or recirculate water from your sump or from a direct link to your over flows into the air chamber that makes the bubbles that aerates the water and lifts the poo out.

So what makes you think the skimmer you have it to much ? I duno anything about the Seaside Aquatics ES5 but I do know skimmers are not efficient at there job and I doubt they could over skim a tank to death

Depending on the other equipment you have alot of times its recommended to have a much larger than needed skimmer.

If its power consumption worries compare the cot to run vs the cost to buy a new skimmer and you could run the old one for YEARS before it was ever made up.