Jump to content

125G Reef Setup--Caution large pix


bananags

Recommended Posts

Here is what I got, some part are used, some are new, some i already have

Tank:

Oceanic 125G 48x24x24

Sump 29G

135lbs of "dead" live rock stored dried out in storage of 6months

70lbs of live rock from existing 1year old tank

Fish, snail, hermit crab, sps,zoo,acro..... from existing 29Gal tank

Pump:

Iwaki WMD40RXLT: Circulation

Iwaki MD30RLT: wave effect

Ocean Motion 4 way

Stand and Hood:

Home made canopy/hood

Oceanic Stand/ modified to add 1 door

Light

Coralife 48 Inch Aqualight Pro retrofit kit: 2 x 150W MH DE, 2x 93W artinic, moon light LED

Sump light: homedepot light

Controller:

Cypress micro-controller, code developed by me, tested on the 29gal tank for a year

Control Temp, top-off, pumps, feeding, timers, reminders, tank life....

Main Drain: 1.5"

Close loop: drain 1.5", 3/4" returns

Pipe/valves: lowes/homedepot parts, very few from online

R/O water with 3 x 55Gal barrel from Austin Homebrew.

Instant Ocean Salt

Not yet connected:

1/2 HP Chiller: not connect yet, for summer time

Koraline Calcium reactor

================

I probably missed something, took me 6 months to build this up, don't have much time with a 4 months new born ;-)

post-244-1197523902_thumb.jpg

Edited by bananags
Link to comment
Share on other sites

Drill the tank with Ebay diamond drill hole saw bit 45min/hole (1/2" glass)---> cost about $15 for the drill bits, i got 2 set from HK

post-244-1197524016_thumb.jpg

post-244-1197524204_thumb.jpg

Built the hood

post-244-1197524251_thumb.jpg

Paint the back with Krylon Blue spray paint and make a rock rack with pvc pipe

post-244-1197524354_thumb.jpg

Piping

post-244-1197524418_thumb.jpg

post-244-1197524445_thumb.jpg

Old tank and new tank

post-244-1197524527_thumb.jpg

New tank view

post-244-1197524591_thumb.jpg

Rock rack support

post-244-1197524669_thumb.jpg

post-244-1197524721_thumb.jpg

Light

post-244-1197524759_thumb.jpg

Euro Reef RS180 Skimmer

Added bubble trap (not showed in picture in the sump)

post-244-1197524851_thumb.jpg

Sump layout : several small things have changed since: added bubble trap, added filter sock and adjust skimmer a little bit (not showed here)

post-244-1197524914_thumb.jpg

Fill in water

post-244-1197525028_thumb.jpg

After Day one, moved the 29Gal rock and live stock over at 3AM the morning before

post-244-1197525067_thumb.jpg

Day two, add filter sock, fixing the micro bubble problem, still need the skimmer to break in, water still not yet cleared, skimmer put out lot of tinny bubble, picture taken w/o artinic light

post-244-1197525250_thumb.jpg

post-244-1197525230_thumb.jpg

post-244-1197525295_thumb.jpg

post-244-1197525281_thumb.jpg

Rocks are set up so Tangs can run both front and back, will get blue hippo tank soon, I used to have a small hippo tank in the 29gal until the itch killed it. now i quarantine everything 1 months =) lesson learn

Disclaimer: I am no way an expert in reef tank, I set up the tank based on what I read online over the year and what work/does not work with my 29Gal (and what I read here on austinreefclub and reefcentral ). Being an engineer my day, I planned for everything (just in case). Tank was designed to allow me to replace any component anytime I want. Tested almost every case for leak and power loss that I can think off, so far, it's bullet proof on in my book =)

Thank you for viewing

Comment are welcome.

Few more thing to do:

-get rid of the bubble from skimmer (wait for it break in first to see if it goes away)

- the iwaki WMD40 pump is a bit loud/vibration for my taste, it's mounted to the stand now, I will try to put it on a thick foam instead and see if there will be less vibration

-get more fish in the quarantine tank and maybe next month, if thing line up ok, i will add them in the tank

Josephatmbimortgage: i'll visit you soon =) for coral

Edited by bananags
Link to comment
Share on other sites

thank you for the kind comments. :D

here some of mistake I made that maybe it will help others

(that i have been trying to correct in the last few week)

- need the bubble trap, the middle baffle should be at least 2" higher than the other 2 --> added after everything is up :angry:

- water return from the tank and skimmer need a long distance run before get back to the pump --> need time to extract all the bubble -> I had to use a filter sock over the return and skimmer to take care of micro bubble (baffle bubble trap can't eliminate micro bubble)

-don't mount the Iwaki or external pump to the stand --> lot of vibration --> noise --> I had to unbolt them and put on top mouse pads /foam cushion

-don't stare at the tank for more than 15min at a time :D

Edited by bananags
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...