Juiceman
-
Posts
4,465 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Store
Gallery
Events
Local Fish Stores
FAQ
Blogs
Downloads
Everything posted by Juiceman
-
I just feed my fish everyday.... no problems here!
-
I was instructed by ATI that when you have 2 fixtures, the cords have to be in the center because of how the fixtures exaust their heat. Make sure you vent that Canopy on the sides
-
Several large tangs is quite the understatement. Well I didn't feel like counting...... Geez hahaha Sent from my iPhone using Tapatalk
-
I feed every other day 2 ice cube tray portions of Rods and alternating mysis and PE mysis.. And have an auto feeder running once a day feeding NLS Thera+ Pellets. I have several Large Tangs, a puffer, 6 Anthias, 2 Foxfaces, 3 Clown Fish, a Flame Angel, and a Red Coris Wrasse. Sent from my iPhone using Tapatalk
-
Light and Tunze still available!
-
You can get 22 or 23 awg ethernet wire which is nice because it has 4 pairs in a single housing, 23 is way more common. There is 18 and 20 awg but they tend to get expensive and can be very stiff depending on the shielding and if they're solid or stranded. Can also find 2 or 8 pair ethernet wire as well. Realistically with the low voltage in this case, I don't think you need anything close to 22 awg wire unless you're running it a long distance where the lower gauge wire's resistance becomes a factor. It would be extended maybe 7-8 Feet.
-
Never mind, It says 22 gauge on BRS.
-
Ok so I got everything installed. I was thinking of adding a float switch in my ATO container to let me know when it needs refilling. However, the ATO is waay too far away to install as i'd purchase it. What type of wire would I use to extend it?
-
I Like the RW as well. Will Not Purchase another WP
-
I just have to figure out how to install the float valve on the lid so that it turns off the skimmer when it fills about half way Sent from my iPad using Tapatalk
-
My biggest thing is ease of disposal and monitoring... I don't plan on letting it fill all the way... Maybe half way Sent from my iPhone using Tapatalk
-
My biggest thing is ease of disposal and monitoring... I don't plan on letting it fill all the way... Maybe half way Sent from my iPhone using Tapatalk
-
What's a DIN cable? and i've already ordered the Neptune Break Out and a float switch so no going back there.
-
I have crushed coral in my 200g and had Aragonite Sand in my 60. I would definitely go Sand in any new setup. Nothing necessarily wrong with the crushed coral, I just like a little more of a "natural" look.
-
alright ordered them. I'll hit you guys up if I run into any issues!
-
anyone need anyting from BRS? haha
-
Nevermind, it's on the head unit next to the PH
-
How does the breakout connect to the Apex?
-
Ok, so the plan is to use a larger container for my Skimmer waste, then use a float switch mounted to the lid to tell me when it's if if I fail to empty it and turn the skimmer off until I emply it. Currently i'm using a lead detector to tell me when my skimmer waste overflows... which is kind of annoying since it's already overflown when it notifies me.
-
So just buy the breakout box and float switch and that's it? Sent from my iPhone using Tapatalk
-
I'm going to install one. Haven't purchased it yet. I want to make sure I have everything I need Sent from my iPhone using Tapatalk
-
I want to install a floatswitch in my Skimmer waste container to turn off the skimmer if it was to ever get too full... I'm a noob when it comes to breakout boxes, can anyone point me in the right direction?
-
Updated!
-
Updated Sent from my iPhone using Tapatalk
-
Reduced! All livestock is gone! Ready for a new home!
