OU12004

Picked up these 2 today, hopefully I can figure out why my sps are bleaching out so I can move them over.

Yes the Dome had 2 Copperband Butterflies, one was swimming around and looked good the other was hiding behind a rock and was not very active. I asked Hunter to feed them and the active one did not eat and the shy one attacked the food. I guess that's why you should see them eat and not go off which one you think looks better.

Found a single Aiptasia so I added a Butteryfly, so far, Butterfly 1 Aiptasia 0.

Does anyone know if the butterfly eats all of it or will it grow back?

I'm in the wrong business $940 from selling coral. Hopefully with this new tank and Apex I will be able to grow something big enough to sell it.

LPS side

Happy early Christmas and Merry New Year.

I have started moving coral over and the LPS look good but the Forest Fire and Seasons Greeting started bleaching out so I have moved them back. I have left some German Blue frags in, which bleached out, but are starting to look better.

I have reduced the light to 25% blue max and 15% white max. Ramping up over 8 hours on max for 5 hours.

I went with shopping with the wife and kids today and I will list the fish requested in order.

Can we get a shark? No their not reef safe

Can we get a sting ray? No their not reef safe

Can we get an eel? No, well maybe.

Can we get the pretty black and white pokadoted one he's cool (clown trigger)? No he's aggresive

Can we get the cool one with the horns (cow fish)? No, that will kill the whole tank, it has toxins

Fine what what about the blue one(red tail trigger) Maybe but it is $150 and I think it eats clams.

"Clams just sit there" we should get the other one (blue cheek trigger)

We can get the black and blue stripped one (chalk bass). "That's boring like the fish we already have."

How about the pretty blue one (Macneill's Assessor Basslet) "Boring!"

Please note this was a discussion between my 10 year old dauter and my wife.

My wife was the one asking questions!

I'd heed Victoly's advice. As your sand settles and sorts itself, the tendency is for the larger grains to be driven to the bottom and the finer grains to be pushed towards the top. Mix in larger grains all you want but eventually, they'll settle down and all you'll have is a base layer of the larger sand you added and then the fine black sand still at the top, getting blown around. Basically, you'll end up with the same result but by the time it actually occurs in your system, you'll have fish and corals to complicate the removal of the sand.

Yea some times it is better to just admit you messed up and start over. Any ideas for black sand that is larger than 5mm

I am going to try and use a gravel cleaner to remove the lighter particles and then back fill with a larger diameter sand. The sand i used is .25-5mm does anyone know of a black sand that is larger?

I moved the power head and took it off of wave, sand is still being pushed to 1 side. Anyone know what to do with 80 pounds of sand?

I have the powerhead on the lowest setting and I was trying not to make a hundred dollar mistake. I was thinking of mixing in a heavier sand to see if that would keep it in place

I added 80 pounds of CaribSea black sand and it is way to light and is getting blown off all the way to the glass bottom, any ideas on what to do about this. Can't beleive I got to this part of the build and messed up on the sand. I really do not want to have to have to take it out and start over.

I'm using the pellets that came with the reactor. I've looked around and can't figure out what, if any, off the shelf brand is the same. Seem to be a little larger than BRS but smaller than the NP XL's.

I would just avoid anything that is a sphere or oval and smooth like the NPX. If they're cylindrical shape, or uneven shaped, they should be fine. If the reactor never shuts off I think it would be less likely to clog as well.

I just have my reactor in the same compartment as my skimmer and it works fine. From what I've read it doesn't matter where they are in relationship to each other as long as there is a skimmer in a tank. I would keep it the way you currently have it.

Do you have your reactor setup to recirculate the water? I currently have mine setup to run directly into the skimmer and will need to rework the plumbing to have it recirulate and go into the skimmer chamber. Do you think that is worth the effort?

Very nice. This should look awesome once your get coral filling it in. I've always liked the island look with or without sand.

I'm assuming you're using cadlights or other pellets, but do not use TLF NPX pellets with that reactor. Once they start to wear down, they perfectly fit in the holes at the bottom and clog it up. Burned my pump out on mine and it took a ridiculous amount of work to clean the holes out because they're not very accessible.

You probably don't need to plumb the reactor directly into the skimmer but wouldn't hurt either way. I still really like running pellets. Seems like it's a mixed bag depending on the nutrient input / export capabilities of a tank. You may really benefit since there's not going to be much export without a sandbed or other area for denitrification.

Jestep,

Thanks for the advice, what pellets worked for you? I was looking at the NP biopellets all in one or the BRS pellets, have you tried either of these?

I wanted to go bare bottom but the wife is making me get sand because she thinks the bottom looks dirty, I currently have the return going into the skimmer chamber, should I rework the return to go directly into the skimmer?

Water and 50 pounds of live rock in

I finished the plumbing and turned all of the pumps on and everything seems to be working correctly. Time to pick up the few remaining pieces to the puzzle. Home Depot here I come for the 20th time.

Tanks on the stand, hoping to get water in it soon.

JeeperTy, do you think this will work? Also why did you take your reactor out?

Does it matter if your protein skimmer is before or after the bioreactor in the sump. I do not have room for the skimmer and the return pump but the bioreactor and the pump will fit together.

Thanks KimP and Bpb.

I am looking for live rock and was considering going to TBS and ordering their live rock, has anyone ordered from there?

Anywhere else I should look at for live rock?

* Answered my own question Fishey Business has some really nice live rock if anyone is looking locally. I got some Pukani rock and it great.

Thanks for the magnet idea. I was using velcro for the doors but it would not stick to the wax on the stand.

Stand is done! It took longer than I had hoped but I got there eventually.

Got the doors from Rockler and got the first coat of paint on, but of course we ran out of paint and the store did not get any paint in this week. Hopefully they will get some paint in next week and I get this tank wet finally.

By the way does anyone know how the plumbing on a Cadlight tank goes together since they didn't send any directions and they are not answering my emails?

Here is the tank on the unfinished stand my friend and I built over the wekkend. I never could find someone to build it for me so we just did ourselves.

Does anyone know where I can buy some custom doors locally. I found some on line but they will not be delivered for 3-4 weeks