Texasrob Posted July 11, 2010 Share Posted July 11, 2010 did a water changs this morning and i turned off my surge and when i went to turn it back on only my ato will not work. tried a diff outlet and opened it up and saw an on/off switch but that did nothing as well. i have only been running this for a month or so. looks as if getting no power no lights are on Quote Link to comment Share on other sites More sharing options...
DaJMasta Posted July 11, 2010 Share Posted July 11, 2010 Hasn't yet happened to either of mine... On the inside, does it look like any of the connections from the power cord to the board are damaged or loose? Is there any scorch marks on the board? Does flipping it to the other mode help? Any evidence of water being in there? Does it power on with the pump disconnected (could be a short in the pump)? I don't think it has an internal fuse, so I doubt it would be that.... Quote Link to comment Share on other sites More sharing options...
Texasrob Posted July 11, 2010 Author Share Posted July 11, 2010 no to all the questions above, but does say fuse on the board and its soldered Quote Link to comment Share on other sites More sharing options...
Texasrob Posted July 12, 2010 Author Share Posted July 12, 2010 I called jbj and they said they would replace it as long as I had a receipt, witch I do not have... Quote Link to comment Share on other sites More sharing options...
caferacermike Posted July 12, 2010 Share Posted July 12, 2010 Use a continuity tester across the fuse to see if it is blown. If it is, it will only take a second to solder in a new one. To bad you are in Killeen as we could test it in seconds at my house. Quote Link to comment Share on other sites More sharing options...
Texasrob Posted July 12, 2010 Author Share Posted July 12, 2010 Thanks bout to test it Quote Link to comment Share on other sites More sharing options...
Texasrob Posted July 13, 2010 Author Share Posted July 13, 2010 they all tested good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.