SAM

got my rendering of my display tank custom Octolid - got a hinge feed door front center with a cut out for an autofeeder chimney at the left top corner. also got my frag rack installed. Sent from my SM-G955U using Tapatalk

haven't update for awhile now. it took me couple weeks to get it filled with sand, fine tune the sump, flow plus I was literally sick for almost a week in the middle of all of these thing. now it is finally in the cycle phase. starting to get the RMS railing up for the lights, installed the apex system, fix the chiller (there was a bad wire), fix the leak, breaking in the skimmer, installed the heater. next on the agenda is to add the frag racks to the frag tank, fix the penductor since I broke one when I was tweaking it lol. finish installing lights, i only have 2 gen4pro at the moment, need to get 2 more. still on the waiting list for the L8 algae scrubber. ordered my lid cover from octolid - it will come with a feeder hinge and a cut out for the auto feeder chimney. definitely have plenty of flow (these 2 pumps is blowing my sand everywhere lol) from the reeflo barrcuda/hammerhead pump + the ocean motion/reeflo Dart but still wanna add 2 more mp40wqd at both side of back wall of display tank to serve as backup, additional flow since I already have an ecotech backup battery in case of power failure. might invest in another backup battery in the future. still need to get more RMS mounting for the frag tank for my 3 gen2 lol.....totally forgot I have nothing to mount them on. I will post more picture in the coming weeks with more progress. oh yea, I still gotta calibrate my salinity, ph, orp probe....just being lazy right now. this has being a tremendous undertaking, way more than I thought it will be. lots of frustration for sure and road blocks. yet I'm chipping at it little bit at a time. I'm getting closer and closer. i feel like I learned so much about this tank like as if I'm learning how to raise a kid lol. really want to shout out to both Jim and Seth for all the support, wisdom, and encouragement! Sent from my SM-G955U using Tapatalk

the middle 40g one is strictly for water top off, the left 40g just extra at this point lol. I was gonna use it for fast mix salt station etc.. Sent from my SM-G955U using Tapatalk

nope did it myself lol. just wanna have room underneath for my wife stuff Sent from my SM-G955U using Tapatalk

also got on the waiting list with Bud on Turbo's Aquatics Algae Scrubber....really have no idea how long its gonna take cuz his main engineer job just cut back and he's the only engineer left for his department plus he's trying to figure better light situation for the L8 and L16 model. So this is to hoping..... lol

Being awhile since I last updated: Finally finished plumbing the RODI system & all the water storage including my 2 old 40gallon & the new 150gallon. One of the old 40g will be used for water top off plumb with the Tunze 3155 <---will probably eventually replace with the Apex once it dies out. Definitely upgraded my system, added a Chlorine Buster unit, 100gpd piggy back RO Membrane, and another dual DI at the end. So now, I can produce 190 gallon of water per day. As you can see from the video below, the TDS is pretty good now. 😁 20180630_092142.mp4 Oh yea, I also finished my rockscape with plenty of holes for fishes to swim through & tons of mounting spaces for corals....will add sand to it soon.

I had the same question too but I believe it was explained to me by using the 1.5in valve in between the 2 T connector to adjust the how much the main flow get to go directly to the return and how much it will be diverted into the chiller. I'm also to figure out by how long it takes the chiller to take down the temp to finalize the amount of flow being allowed to flow through the chiller. chiller does have a recommend flow rate but I don't have an apex flow measure connector lol. Sent from my SM-G955U using Tapatalk

good question, I had the same question and concern myself. after consulting with Seth and Jim, we felt the pump is strong enough to handle it. maybe Seth or Jim can chime in and give a better explanation. Sent from my SM-G955U using Tapatalk

Finally Done with plumbing in the ocean motion & the chiller. Next is Water Leak test.....keeping finger cross. Then its onto plumbing in the RODI system & water change system. Once all and done, it'll be aquascape!!!!! <-- this time I will spend more than 1 hr on it lol and I promise not a fruit stand!!!!

Finally finished plumbing the frag tank ino the main.....now only ocean motion left and all the other equipments lol.

Some more update: Plumbed and finished installing the return plumbing this weekend. Ordered some more parts online that's coming in this week. Then I'll be finished plumbing the frag tank into the system. The last part of plumbing will be the ocean motion <-- a bit tricky since I have not figure out the variance sequence of the ocean motion lol. BTW, am I the only person having trouble logging in from tapatalk???

same rock and sand from my old tank actually, might need to top off some more rock though. I'm gonna really do a better rockscape this time around so Seth won't laugh at my fruit stand lol Sent from my SM-G955U using Tapatalk

for some reason the tapatalk is no longer giving me alert!?!? I literally have to check in myself to see any updates lol Sent from my SM-G955U using Tapatalk

probably a year or so [emoji52] had too many life events during that time including a new born who is now 2yrs old and a new job. Sent from my SM-G955U using Tapatalk

finally got the electric work done for the tank project. now I have 2 eparate dedicated 20amp outlets, one on garage side and one on dinning room side, for the tank in addition to the original 20amp outlets for the dining room....a total of 60amp for the whole tank setup. Sent from my SM-G955U using Tapatalk

Thanks to Seth & Jim! We finally started plumbing!!!! It will be a long process with planning and problem solving. looking at these pics do not do it justice. we spent alot of time on it. I was able to clean up the garage a bit and restructure and outfit the canopy with support so we can use it as a stand for the 2 water storage tank on the left. it's a new setup we gonna use for making water top off and water change simple. upcoming weeks: 1. trying to figure out how to salvage the ocean motion parts (missing several links from the existing hose to the tank) and plumbed into the tank. 2. ordering more plumbing parts that can only be found online like pvc gate valve 3. backup motor/pump for the main return 4. more plumbing lol Sent from my SM-G955U using Tapatalk

ok, finally in the house. I guess plumbing next. Sent from my SM-G955U using Tapatalk

done with 1st layer of stain today...hopefully I can find energy to get the 2nd layer tomorrow. Sent from my SM-G955U using Tapatalk

finally new update!!!! I got My frag tank and stand from Marc with Melev. the stand is unfinished so I will be doing some wood filler, wood condition, staining, and coating etc these couple weeks. here's a link to Marc stand making video: Sent from my SM-G955U using Tapatalk

Have anyone used either of the following methods to take out minor scratches in your tank: 1.using an non gel toothpaste with baking soda to polish area gently for 1min and repeat until the scratch is gone Or 2. Using a clear nail polish, then let it sit for 1hr to cured, then use nail polish remover to remove excess Sent from my SM-G955U using Tapatalk

Already thinking about my fish wish list: 5 tangs: Hippo Yellow Sohol Purple Naso Clown fish: 1 pair (1 Orange and 1 Black) 5 wrasses: 6 lines Mystery Red head solon Hoeven Scarlet pin stripe Maybe: Dragonet Alage blenny Diamond watchman goby Sent from my SM-G955U using Tapatalk

He gave me an estimated time of 6wks. Sent from my SM-G955U using Tapatalk

Since the stand is like 42in tall and the tank is another 30in, I had to climb in to get the detail cleaning lol. Please steer away from those white legs!!!! Sent from my SM-G955U using Tapatalk

Yep Marc is building the stand too. I would say he gave the best deal compare to 5 other vendors I got quote from. For the build, we've decided to go with no canopy, open look. Gonna buy some Radion RMS to hang the lights this time. Going for the clean look lol. Sent from my SM-G955U using Tapatalk

Ok, just ordered my frag tank/stand with Marc from Melev in Ft. Worth. It's gonna be a 36x36x10 frag tank, had to change the height of stand to 35in for it to fit through the front door lol. Marc had to remind me of that, originally wanted a 36in tall stand lol...oops!!! Once its done, I'll drive up there and pick it up. so if anyone need to order anything from him, I can pick it up for you too =)