offroadodge Posted August 9, 2009 Share Posted August 9, 2009 ok, thanks for all the advise. Since the past 2 weeks i have been not using my skimmer per the instructions on KICK_ICH. Last night i started the skimmer back up and there are little air bubbles coming outta the exhaust on the skimmer putting alot of bubbles in sump. Before i turned it off it didnt do this. i have taken the pump apart to make sure the needle wheel isnt stopped up or broke and all looks good. The skimmer is a PM150 redline. Any ideas Link to comment Share on other sites More sharing options...
+dapettit Posted August 9, 2009 Share Posted August 9, 2009 I guessing, mind you it's only a guess, might just need to broke in again. Let run and see if it doesn't fix itself. Dave- Link to comment Share on other sites More sharing options...
atxryan Posted August 9, 2009 Share Posted August 9, 2009 I have an RL150 and notice this when the skimmer has been off for a while.. I usually open up the valve on the skimmer and let it do its thing.. Is it producing lots of skimmate? also is there a kink in the air tube because that will cause extra bubble production.. Let me know if there is anything else I can do to help.. Does your skimmer self start every time.. I have to blow in my air tube every time I restart it.. What a pain!!! Link to comment Share on other sites More sharing options...
offroadodge Posted August 9, 2009 Author Share Posted August 9, 2009 alright guys, its starting to clear up. It was producing alot of skimmate and i had it turned down all the way i could. Now it realy started to clear up. Thanks to both of ya, Thanks for the help. Link to comment Share on other sites More sharing options...
atxryan Posted August 10, 2009 Share Posted August 10, 2009 any time Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.