Makena95GT Posted September 4, 2013 Share Posted September 4, 2013 Found this in one of my many boxes of tank stuff. Have no idea what it is or for. Link to comment Share on other sites More sharing options...
kingjames Posted September 4, 2013 Share Posted September 4, 2013 looks like a float valve Link to comment Share on other sites More sharing options...
Nwehrman Posted September 4, 2013 Share Posted September 4, 2013 It's a simple mechanical float. I can't tell if its side or top mount... Commonly used for RO units Link to comment Share on other sites More sharing options...
kingjames Posted September 4, 2013 Share Posted September 4, 2013 basically you mount it to the side of your tank/sump at the level you want your water to be and hook up a resivoir and either make a gravity fed ato or buy some kind of ato system, these are best used with gravity fed IMO. basically the valve floats on top of the water and whenever the water line drops so doses to float, which then allows water from the ato resviour to replace the water in tank/sump if that makes sense. A simple search on google for gravity fed ato should give you plenty examples Link to comment Share on other sites More sharing options...
Makena95GT Posted September 4, 2013 Author Share Posted September 4, 2013 Interesting, so I could find a way to incorporate it into my gravity feed ATO I plan on building? Link to comment Share on other sites More sharing options...
kingjames Posted September 4, 2013 Share Posted September 4, 2013 i think so, but have never used that paticular float before so im not 100% sure Link to comment Share on other sites More sharing options...
jestep Posted September 4, 2013 Share Posted September 4, 2013 Just run 1/8" (guessing on the diameter) jaco PE tubing into it from your ato reservoir and it actually should work. I would probably test a lot first before trusting it though. You should be able to find 1/8" jaco bulkheads so you can attach it to the ATO reservoir. Link to comment Share on other sites More sharing options...
Makena95GT Posted September 4, 2013 Author Share Posted September 4, 2013 Sweet. guess I'll play around with it tomorrow. Thanks guys! Link to comment Share on other sites More sharing options...
ckyuv Posted September 4, 2013 Share Posted September 4, 2013 That's what I use for my ato just install a hose going to a container of water higher than the float and your set Link to comment Share on other sites More sharing options...
Makena95GT Posted September 4, 2013 Author Share Posted September 4, 2013 So then with this, I wouldn't need to have the container be sealed? Link to comment Share on other sites More sharing options...
victoly Posted September 4, 2013 Share Posted September 4, 2013 nope. Link to comment Share on other sites More sharing options...
(Bio)³ Posted September 4, 2013 Share Posted September 4, 2013 No your gonna make a vacuum if it is sealed Link to comment Share on other sites More sharing options...
ckyuv Posted September 4, 2013 Share Posted September 4, 2013 Nope if I leave the lid on my container it will not work. I poked a hole in the top of the jug so air can enter as water drips out Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.