esacjack Posted February 22, 2013 Share Posted February 22, 2013 Same as subject. Can LED 20MM Star PCB's be trimmed down to fit? I'm building some into a very tight fit, and it work much better if I could just nip a few of these unused solder pads off... Link to comment Share on other sites More sharing options...
+Capt. Obvious Posted February 22, 2013 Share Posted February 22, 2013 Yes, with care Link to comment Share on other sites More sharing options...
+Capt. Obvious Posted February 22, 2013 Share Posted February 22, 2013 See post #11 here: http://www.candlepowerforums.com/vb/showthread.php?213630-5*Cree-Q5-M-g Link to comment Share on other sites More sharing options...
esacjack Posted February 22, 2013 Author Share Posted February 22, 2013 Thanks for the info! Also, I wasn't aware there was such a strong following of flashlight modders. I'd always wondered what my MAG would be like with a dicon led cluster Link to comment Share on other sites More sharing options...
Timfish Posted February 23, 2013 Share Posted February 23, 2013 I don't know if this helps but there are also 10mm squares and these customizable 40mm rounds with 7 LEDs: http://www.luxeonstar.com/Luxeon-Rebel-7-LED-Round-Assemblies-s/234.htm Link to comment Share on other sites More sharing options...
Stephen Posted February 23, 2013 Share Posted February 23, 2013 hmm, this is very cool. Gives me some ideas. diy 3up seems in order. Link to comment Share on other sites More sharing options...
esacjack Posted February 23, 2013 Author Share Posted February 23, 2013 I don't know if this helps but there are also 10mm squares and these customizable 40mm rounds with 7 LEDs: http://www.luxeonstar.com/Luxeon-Rebel-7-LED-Round-Assemblies-s/234.htm DOH. Oh well. I'll try them for my next project I was actually about to desolder the leds from the pcb's last night, and remount them to a micro pcb I have. Unfortunately, that site doesn't carry UV led's Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.