Sierra Bravo Posted January 29, 2018 Share Posted January 29, 2018 This has been a year in the making and I have a detailed thread build on one of the larger forums, but I'd like to do a condensed version just for the sake of documentation and share my own personal journey in the hobby here as well. I plan to heavily plagiarize my other build thread because originality takes effort and time. I'll start with this: I never had an aquarium before, except a small freshwater tank in my early 20's (I'm 50 now). I terminated its run when my dog got between my feet while carrying a plate of food to the living room. While tripping I instinctively reached out and grabbed the first thing, which happened to be the tank. Its demise was spectacular. The neighbors downstairs weren't as impressed. Fast forward to our house in San Antonio. This was the original area, a wet bar that we used to stuff all the things nobody wanted to deal with in. It was useless, and the wifey wanted to close it in and make the opening a built in lighted bookshelf. I had already mentioned that I'd like a reef tank one day but was thinking about a tank and stand combo. It dawned on me that with water and a drain right there I had the ability to do a built in tank with a small fish room. My wife seemed on board with the plan. I'll never forget her sweet words: "You never do anything for yourself; don't worry about a budget just get what you want". Oh, if she only knew then what she knows now. . . Quickly, before anyone with common sense could change anyone's mind, I demolished the bejusus out of the family room side - then went to bed: The next day I stopped and figured: "It's probably be a good idea to have more of a plan". I started doing a TON of research on line and developing an idea of what would work, the equipment to use, and how to end up with what I wanted. My wife still wanted the lighted bookshelf, which was going to be a challenge. Here's what I conceptualized: Here's a quick run through on the demo and remodeling of the plumbing, electric and walls: I used FRP on the tank side of the room. Built a salt water mixing station and placed my RODI unit: Tank stand was a bit challenging: I had to fit everything I needed and somehow have room to have lighted shelves for the wifey, I came up with incorporating the shelf alcove directly into the stand itself: The sump came in about this time and I was finally able to do some plumbing. I chose a Trigger Systems 36. I had seen so many plumbing setups that looked great with colored PVC and decided to do the same: I've slacked off enough at work this morning and need to get back to it, but I'll post up more as soon as possible. 4 Quote Link to comment Share on other sites More sharing options...
Gig 'em @ NDstructible Posted January 29, 2018 Share Posted January 29, 2018 WOW! Great build so far. Clearly you've done your research and planning. Can't wait to see pictures of this tank when it's filled with fish and mature acro colonies! Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted January 29, 2018 Share Posted January 29, 2018 See what I'm saying! Fabrication master! The tank build was amazing for someone that never even kept a reef tank! Quote Link to comment Share on other sites More sharing options...
jolt Posted January 29, 2018 Share Posted January 29, 2018 Love it! Quote Link to comment Share on other sites More sharing options...
Bluemoon Posted January 29, 2018 Share Posted January 29, 2018 Awesome build and planning! I’m in SA too around the medical center area. More than happy to supply some tester frags when the tanks ready. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Paula Posted January 29, 2018 Share Posted January 29, 2018 What a brilliant build! I can't wait to see more! Quote Link to comment Share on other sites More sharing options...
mFrame Posted January 29, 2018 Share Posted January 29, 2018 Fantastic build thread! I'm loving the re-purposing of the wet-bar. Several members have built tanks into new house designs but this is the first in a long time where someone modified an existing home but was lucky enough to have a water source and drain. Looking forward to following along! Oh, and props for making sure the wife got her bookshelf out of the whole process! Quote Link to comment Share on other sites More sharing options...
Sierra Bravo Posted January 29, 2018 Author Share Posted January 29, 2018 13 minutes ago, mFrame said: Oh, and props for making sure the wife got her bookshelf out of the whole process! Ha! Like it was an option. . . 3 Quote Link to comment Share on other sites More sharing options...
mFrame Posted January 29, 2018 Share Posted January 29, 2018 8 hours ago, Sierra Bravo said: Ha! Like it was an option. . . Definitely insured your project gets to continue... Quote Link to comment Share on other sites More sharing options...
Popular Post Sierra Bravo Posted January 30, 2018 Author Popular Post Share Posted January 30, 2018 OK, work is done, I have a glass of bourbon in front of me and time to continue catching up my progress. I installed the tank March 2017. It's an Aqueon 120, drilled to receive a Synergy 16" Shadow overflow. I came up with an idea to cover the rear and sides of the tank with a PVC foamboard, with the goal being to have the ability to easily remove and replace it for maintenance while covering the pipes. This is the idea that Ty stole then whined about how the seam looked (I saw it - wasn't all THAT bad) I used a Curve 5 skimmer, which was changed for a Curve 7, a GFO reactor, and a fuge grow light. Flow was handled by a pair of XF-250 Gyres. Return pump is a Current USA DC pump, with a duplicate being used to run the saltwater mixing station and available as a backup if the main failed. These are good pumps with lousy controllers; if you ever contemplate them I'd move on to something else. Lighting was handled by a pair of Maxspect Ethereal LED's, which I really like. I had to mount them creatively and used a pair of monitor arms. I have since moved on to a suspended frame and added T5's, but that's better left for another post. Some other build shots of the back of the tank: The plumbing is set in such a way that by using different valves, the stored fresh RODI water is fed into the mixing tank as well as the fresh water top off tank, the salt water is mixed and heated, old water is pulled from the sump straight into the drain, and new salt water is moved back into the sump, all with the same single pump. A 15% water change can be completed in less than 10 - 15 min, not counting mixing. On the outside, I used a cabinet lift hinge for the door so that I could access the front of the tank. It's the best thing I put on the tank in retrospect. Here's a few shots of that and the completed trim work, along with the wife's lit shelving requirement: This was completed sometime in May of 2017. I'll pick up with the rock and sand next post. Thanks for reading. 7 Quote Link to comment Share on other sites More sharing options...
+BobcatReefer Posted January 30, 2018 Share Posted January 30, 2018 3 Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted January 30, 2018 Share Posted January 30, 2018 OK, work is done, I have a glass of bourbon in front of me and time to continue catching up my progress. I installed the tank March 2017. It's an Aqueon 120, drilled to receive a Synergy 16" Shadow overflow. I came up with an idea to cover the rear and sides of the tank with a PVC foamboard, with the goal being to have the ability to easily remove and replace it for maintenance while covering the pipes. This is the idea that Ty stole then whined about how the seam looked (I saw it - wasn't all THAT bad) [emoji14] I know you're new to the club but I was voted 2017 Reef Whiner of the year. Show some respect. It was well earned. [emoji19] 1 Quote Link to comment Share on other sites More sharing options...
Sierra Bravo Posted January 30, 2018 Author Share Posted January 30, 2018 I apologize for my insolence and will resume my position as "Guppy", as noted under my name. I do NOT want to make the owner of my next frag pack upset. 1 Quote Link to comment Share on other sites More sharing options...
Good Greef Posted January 30, 2018 Share Posted January 30, 2018 Nice build. I also wish i had a fish room, or at least a low profile utility sink that I can hide near the stand.. does this exist? Anyway, just wondering if those metal hose clamps on your return pump have started rusting yet. I used the same on my previous tank and had to remove it. Quote Link to comment Share on other sites More sharing options...
Sierra Bravo Posted January 30, 2018 Author Share Posted January 30, 2018 I used Tampa Bay Saltwater as my source for live rock and sand. If you are not familiar with them, they are one of only two companies that have state leased water in the Gulf of Mexico to "farm" and harvest live rock. What they do today is place tons of Walt Smith 2.0 in the water and let it sit for a year or more. When you place your order they go out in the boat, pick up the rock and sand, package it in its own NSW, then air freight it to you that same or next day. The bio diversity is just nuts, and since it isn't wrapped in damp newspaper but shipped in water most of it arrives intact. It is, however, expensive. My "cycle" lasted less than ten days before I could not detect the trace amounts of ammonia I was seeing. I never experienced the typical algae or dino issues. As far as hitchhikers I did have some gorilla and stone crabs I needed to remove, as well as one decent sized pistol. But it was well worth it for the trade with all the good hitchhikers including sponges, tunicates, clams, barnacles, worms, feather dusters, pods, and more. I spent many hours discovering things in and on the rock. I still find things I didn't know I had. They also throw in critters and sponges as part of the package: I received snails, crabs, cukes, brittle stars, peppermint shrimp, gorgonias and sponges. I also needed a quarantine system, so while all this was going on I built a stand and set up a tank for fish and a tank for coral. This brings us to the end of May 2017. 1 Quote Link to comment Share on other sites More sharing options...
Sierra Bravo Posted January 30, 2018 Author Share Posted January 30, 2018 24 minutes ago, Good Greef said: Nice build. I also wish i had a fish room, or at least a low profile utility sink that I can hide near the stand.. does this exist? Anyway, just wondering if those metal hose clamps on your return pump have started rusting yet. I used the same on my previous tank and had to remove it. Thanks! That particular pump is the backup pump I use for the mixing station. So far they have not corroded but I'm sure they will at some point. They need to be changed out the next time I clean it. The one I have in my return section of the sump that is submerged I used plastic ties. Also - the nearest I could find for a small sink was the type used for RV's, about 12x15. They also have smaller sinks, similar to the spit sink in a dentist office, but I decided that was too small to really be of use and I didn't have room for a bigger one. I REALLY wish I had a sink in there. Quote Link to comment Share on other sites More sharing options...
jolt Posted January 30, 2018 Share Posted January 30, 2018 What a great little stand for the QT! 1 Quote Link to comment Share on other sites More sharing options...
Gig 'em @ NDstructible Posted January 30, 2018 Share Posted January 30, 2018 That's so cool. I feel like the extra cost in the rock is worth it from all the critters and filter feeders you get with it. Endless hours of discovery and fun is totally worth the extra price IMO! 2 Quote Link to comment Share on other sites More sharing options...
ShawnM Posted January 30, 2018 Share Posted January 30, 2018 Man this build is great everything looks well thought out. I can’t wait to see more Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
victoly Posted January 31, 2018 Share Posted January 31, 2018 this post is relevant to my interests Quote Link to comment Share on other sites More sharing options...
Sierra Bravo Posted January 31, 2018 Author Share Posted January 31, 2018 Lighting. I'm going to post this in its entirety from a DIY post I did on R2R, mostly because I think it's an easy way to create a hybrid fixture without giving up your existing LED's and may benefit others that want to do the same. Parden my copying/pasting from that post: I run a pair of Maxspect Ethereal LED's and recently decided I'd like to provide a boost by adding a pair of T5 HO fixtures. However, my setup is a little unusual with a built-in wall design and a small fish room. Here was how I had my LED's mounted originally off of TV mounting brackets: I needed a suspended frame that would fit my LED's, provide something to mount two single bulb T5 fixtures and allow me to raise or lower the setup as needed. I decided to utilize 80/20 extruded aluminum as a base for the frame (also called T-slot). If you are not familiar with this product, they market themselves as "the erector set for adults" and it is all that and more. I bought all my hardware and material through http://stores.ebay.com/8020-Inc-Garage-Sale at a reasonable price. 80/20 even has a CAD design program on their regular website you can download and play around with. All the hardware I purchased was stainless steel to avoid corrosion. I also found a light suspension system that is used in horticulture applications. It utilizes plastic pulleys and nylon rope instead of cables which is ideal for over a marine tank. Assembly was very simple and the extruded aluminum can be easily cut with a carbide tipped finish saw blade: The Maxspect Ethereal's have a flange around the perimeter that conveniently fit inside the slot and allow me to slide them back and forth for positioning. While this was a no-brainer for my style of light, there is enough flexibility with the 80/20 that I'm confident you could affix most any brand LED. I added a cross brace to both hold the T5 fixture and to act as an attachment point for the lift system: I chose Sunpower single bulb T5 HO fixtures because of the price point. These are also designed for horticulture applications but they are not a sealed fixture like the reef brite. I came up with an unusual solution to help protect the bulb end and tombstone from any moisture. I used toe/finger protectors that are made of medical silicone which did a nice job of providing a snug fit: The lift system itself was easy to install using a 1x4 attached to ceiling joists. The whole rig weighs less than 30 lbs. so I have more than enough support. The frame attaches to the lift system and once leveled, can be raised or lowered manually and maintains it's horizontal position. I used one Blue+ and one Coral+ ATI bulb and have them on a schedule managed by my RKL. I'll start them off an hour a day and slowly extend the photoperiod until around 6-8 hours. In the meantime, I'll back off my LED intensity by about 20% to hopefully help acclimate everything. 2 Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted January 31, 2018 Share Posted January 31, 2018 This is like a Netflix binge, tank build style. 3 Quote Link to comment Share on other sites More sharing options...
jolt Posted January 31, 2018 Share Posted January 31, 2018 Hmm, all the picture links are broken ... 1 Quote Link to comment Share on other sites More sharing options...
Sierra Bravo Posted January 31, 2018 Author Share Posted January 31, 2018 1 hour ago, jolt said: Hmm, all the picture links are broken ... I re-entered all the links. Hopefully, that fixed the glitch. Quote Link to comment Share on other sites More sharing options...
Vernon Saunders Posted January 31, 2018 Share Posted January 31, 2018 Sexy looking tank so far. Makes my wife nervous cause she can see the look in my eye as I contemplate doing something like this once we have the space. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.